Top 10 Best Long Tube Headers For C5 Corvette Reviews With Scores

Last Update:

Is it important to you to get the Best Long Tube Headers For C5 Corvette available on the market? Then there's no need to search any further. When looking for the best suitable Long Tube Headers For C5 Corvette our buying guide will provide you with all of the information you want. Our information is intended to be used as a starting point for assisting you in making the best decision possible.

Best Long Tube Headers For C5 Corvette
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Long Tube Headers For C5 Corvette

We’ve scanned 58623 reviews for you. If you are looking for the Long Tube Headers For C5 Corvette than this review article may help you.

NoProductScoreAction
1DNA Motoring HDS-S10-SWAP 1-5/8'' Stainless Steel Exhaust Headers Shorty Header Compatible with 91-04 GMC Sonoma Compatible with 82-90 GMC S15 Compatible with 82-04 Chevy S109.8Check Price Now
2DEDC Corvette Jack Pads for Floor Jack9.8Check Price Now
3ARTR Titanium Exhaust Header Wrap 2 Rolls (2" x 50' each roll) Kit with 20pcs 11.8 Inch Stainless Steel Locking Ties9.6Check Price Now
4Flowtech Sbc Upright Headers 1-3/4 In W/ 3 In Col9.6Check Price Now
5RA003 Active Fuel Management AFM Disable Device9.2Check Price Now
6DNA Motoring HDS-CAD04 1-3/4" 4-1 Long Tube Stainless Steel Exhaust Header Compatible with 04-07 Cadillac CTS V89Check Price Now
7JDMSPEED New High Heat Spark Plug Ignition Wires Set 10.5mm Replacement For LSx LS1 LS2 LS3 LS6 LS79Check Price Now
8Borla 60087 Corvette X-Pipe8.4Check Price Now
9Corvette Envy C5 Corvette Hyper Flash Fix/Signal Fix/LED Bypass Hyper Flash Harness8.4Check Price Now
10HINSON Red LSx Car Performance V8 Spark Plug Wire Set LS1 LS2 LS3 LS6 LS7 LSA8.2Check Price Now

1. DNA Motoring HDS-S10-SWAP 1-5/8” Stainless Steel Exhaust Headers Shorty Header Compatible with 91-04 GMC Sonoma Compatible with 82-90 GMC S15 Compatible with 82-04 Chevy S10

  • STAINLESS STEEL CONSTRUCTION – Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing cracking and wearing.
  • SHORTY HEADER DESIGN – 4-1 shorty header design increases high flow air.
  • HIGH PERFORMANCE – It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders.
  • EASY INSTALLATION – Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary.
  • FITMENT – Compatible with 91-04 GMC Sonoma, compatible with 82-90 GMC S15, compatible with 82-04 Chevy S10.

2. DEDC Corvette Jack Pads for Floor Jack

  • Non-Slip Rubber】The best material for jack pads.
  • Fit】For Chevrolet Corvette C5 C6 C7 C8 GS Z.
  • Less Damage】Our jacking pucks will help you not damage the chassis of your car when you lift it.
  • Garage Necessities】Whether you are a Corvette owner, a mechanic or a Chevy dealer, our rubber vette jack pucks are essential to your life and work, with their economical and functional advantages.
  • Service】 100% satisfaction guarantee.

3. ARTR Titanium Exhaust Header Wrap 2 Rolls (2″ x 50′ each roll) Kit with 20pcs 11.8 Inch Stainless Steel Locking Ties

  • Universal application. Withstands 1800F direct/2500F intermittent heat
  • Promotes increased flow for improved performance. Reduces temperature & vibration breakdown
  • Outperforms cheap aftermarket colored fiberglass tape insulation wraps
  • 2 inch wide and 50 feet long each roll. 100 feet long in total
  • It is better to soak wraps in water and wear gloves for installation

4. Flowtech Sbc Upright Headers 1-3/4 In W/ 3 In Col

  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow
  • Heavy duty 16-gauge 409SS tubing for increased strength and durability
  • 1-5/8” and 1-3/4” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • 3” collector for maximum strength and exhaust flow
  • Extra thick header flange for a leak-free seal and maximum strength
  • Fit type: Vehicle Specific

5. RA003 Active Fuel Management AFM Disable Device

  • 1.Replacement for Range Technology AFM Disable Device RA003.
  • 2. Keep the vehicle in V8 or V6 mode, easy to operate, just plug in the diagnostic port
  • 3. The product will not reprogram the factory ECU, so that the car is always in full cylinder mode
  • After the device is plugged into the port, four lights will flash in sequence, and only one light will be on when it is stable.
  • 5. Please confirm whether your model is suitable before buying

6. DNA Motoring HDS-CAD04 1-3/4″ 4-1 Long Tube Stainless Steel Exhaust Header Compatible with 04-07 Cadillac CTS V8

  • STAINLESS STEEL CONSTRUCTION – Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability.
  • FULL LENGTH DESIGN – 4-1 full length lightweight header design increases high flow air.
  • HIGH PERFORMANCE – It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders.
  • EASY INSTALLATION – Direct bolt-on installation makes it easy to be replaced with the original headers, no more modification needs.
  • FITMENT – Compatible wth 04-07 Cadillac CTS V8.

7. JDMSPEED New High Heat Spark Plug Ignition Wires Set 10.5mm Replacement For LSx LS1 LS2 LS3 LS6 LS7

  • AFTER MARKET HIGH PREMIUM QUALITY
  • 10.5mm Spiral Wound Design
  • Ultra High Strength/High Temp. Silicone Boots and Sleeve
  • Ready for Install Straight out of the box
  • Please make sure to check fitment below!!

8. Borla 60087 Corvette X-Pipe

  • It uses patented straight-through and multi-core technology to help increase horsepower and torque
  • Package Dimensions: 113.03 L x 55.118 H x 26.67 W (centimeters)
  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses.
  • Country of Origin : United States

9. Corvette Envy C5 Corvette Hyper Flash Fix/Signal Fix/LED Bypass Hyper Flash Harness

  • FIX YOUR FLASHER – Solves problems with your OEM flasher
  • CURE HYPER FLASH – Solves hyper flashing / rapid flashing caused by LED Taillights or LED DRLs without using dangerously hot load resistors on each turn signal.
  • WELL PACKAGED – In static free bag with included pictorial instructions
  • EASY TO INSTALL – Simple 20 minute Plug N Play installation with a #15 Torx Driver
  • ENGINEERED TO FIT – Assembled from genuine GM Delphi parts and a custom made flasher.

10. HINSON Red LSx Car Performance V8 Spark Plug Wire Set LS1 LS2 LS3 LS6 LS7 LSA

  • 8″ Single lead wire.
  • All terminals are stainless steel.
  • All coil boots are EPDM black.
  • 8.5mm spiral core that matches MSD Wires 500 ohm per foot with braid.
  • Fitment: LS1, LS2, LS3, LS6, LS7, LSA, LS9 (NOT VORTEC); Car Fitment Only – Will Not Fit Truck/SUV.

Guide to pick the Best Long Tube Headers For C5 Corvette


Let's go through the qualities of the Best Long Tube Headers For C5 Corvette items so that you may better understand how they work in practice. It would help if you looked for traits such as the ones listed below-
  • Material - Many people buy Long Tube Headers For C5 Corvette made from cheap materials such as metal and plastic. Please don't do it because those frames can easily break with time.
  • Warranty - This is quite important because you will find out whether parts of the Long Tube Headers For C5 Corvette are liable to failure or not. It would be best to keep your warranty till the end in case something happens unexpectedly.
  • Size - If possible, make sure that you purchase compact-sized items; this way, they will be stored away in less space when there's no need for use. It would help if you also tried to pick an ideal size depending upon where you intend to place the Long Tube Headers For C5 Corvette
  • Longevity - Study your options well before purchasing anything because some items may have minor features that can't last for a long time. This way, you will help yourself from wasting money on things that don't have decent durability.
  • Price - You should purchase Long Tube Headers For C5 Corvette that aren't too cheap because this will mean that they were made from low-quality materials and other components. They may not be durable enough for a considerable period either. Try to find out how long the product could last before buying it.
  • Customer Reviews/Ratings - Before making a purchase, make sure that you look at what previous customers say about the quality of the item in question. If possible, try finding independent sites where customers can express their opinion about Long Tube Headers For C5 Corvette. these are more reliable than other options such as manufacturer websites or specialized buying guides, which can also have a hidden agenda.
  • Maintenance - A good product shouldn't have any complicated aspects in regards to when it comes to keeping them fresh and clean. If you're not interested in cleaning yourself, something with no maintenance is okay because you can send it for professional cleaning whenever necessary.

If you've been looking into getting a specific type of Long Tube Headers For C5 Corvette but don't know where to start, then use this buying guide to help out the process! Study the qualities of the most popular Long Tube Headers For C5 Corvette on the market so that you can make an informed decision when purchasing one. In addition, be sure to look at what previous buyers had to say about their experiences and read Long Tube Headers For C5 Corvette Reviews before checking out which items are high-quality or not. Finally, remember that all items need proper care to prevent wear and tear; hence, ensure that you're not purchasing something too complicated to maintain.

Leave a comment

Your email address will not be published.